Jaw Couplings

The CLAMPEX KTR 150 internal clamping set has the smallest dimensions compared to other clamping sets. This clamping set is therefore particularly cost-effective.

The CLAMPEX KTR 150 internal clamping set has the smallest dimensions compared to other clamping sets. This clamping set is therefore particularly cost-effective.

The CLAMPEX KTR 150 internal clamping set has the smallest dimensions compared to other clamping sets. This clamping set is therefore particularly cost-effective.

The CLAMPEX KTR 150 internal clamping set has the smallest dimensions compared to other clamping sets. This clamping set is therefore particularly cost-effective.

• Simple construction, quick and easy installation.
• Spider design presets correct distance between hubs, using raised dimple on leg of the spider.
• Spiders are unaffected by moisture, grease and oils including non-aromatic and non-ketone solvents.
• Temperatures within the range – 40ºC to + 100ºC.
• Range upto 4308Nm Torque-ratings.
• Maximum permissible Misalignments :Angular 10°,parallel 0.4 mm and Axial 3 mm (Initial alignment must be 25% of maximum.)

The CLAMPEX KTR 150 internal clamping set has the smallest dimensions compared to other clamping sets. This clamping set is therefore particularly cost-effective.

• The basic "US" coupling with "Snap-Wrap" type Elastomer and removable collar.
• Inspection and replacement of "Snap-Wrap" without disturbing the alignment of hubs possible.( Drive and Driven Unit )
• Inspection / Replacement of Elastomer within 5 minutes with minimal efforts.
• Maintenance of machines splitting at centerline of shaft is possiblewithout disturbing shaft alignments because of "Snap-Wrap" concept.
• Rated torque range: 21Nm - 4308Nm.
• Torsional Stiffness range: 275 - 183633Nm / Radian.
• KW Rating at 100 rpm range: 0.22 - 45 and 3.30 - 675 at 1500 rpm & 6.60 - 346 at 3000 rpm.